IMS Heat Resistance Anti-corrosion Coatings (300 degress centigrade)
Product Description Description This products is prepared by organic silicon resin, heat resistant and anti-corrosive pigments, fillers, additives and curing agent etc. Use Used as high-temperature mark coating for steel chimney as well as flue, drying tunnel and exhaust pipe.etc. Feature The coating has exceptional resistance to heat (300 oC) for a long term, thermal shock, corrosion, weathering, chemicals, aging, water, statics etc. This product is crosslinked coating which can be curing at ambient temperature fast. It is easy to apply and compactible with inorganic silicate zinc high-temperature Primer
. Product parameters
|Drying time at 23±2℃ ||surface dry:1hour; hard dry: 24hours |
|Theoretical soreading rate ||130~150g/square meters/coat |
|Standard film thickness ||wet film thickness:60~70μm/coat; dry film thickness :30~35μm/coat |
|Coating interval at 23±2℃ ||24hours |
|Coating method ||brush /roller/spray coating |
|Previous Coating ||E06-500 heat resistant organic zinc silicate primer |
|Shelf life ||12 months in dry and ventilated place with unopened condition |
|Number of coat ||two coat of primer +two coat of top paint, dry film thickness should reach 150μm; or three~four coats of top paint directly, dry film thickness should reach 100μm. |
Substrate Treatment Prelevel of primer should be totally dry without floaing dust and greasy dirt. Cautions This product is only for technician use. Workers must get trained before operation. All operations must follow technical directions from Bangjie Co. Ltd. Operators must wear self protection. Operation directions are based on current knowledge and experience. Any changes to directions must get approved by technical specialist of Bangjie Co. Ltd. Health and Safety Read safety direction on package carefully. Operate this product in ventilated condition, avoid over inhaling paint mist and spills on skin or eyes. If coating splashes on skin, rinse with proper detergent or soap water. If splash into eyes by accident, call emergence medical service immediately. Project Case
Company:Changzhou Leimeng equipment Co.,ltd Project:Blowpipe
|Main Coating Surface || Coating Name || Coating Thickness |
|Blowpipe || |
High Temperature Anti-corrosion Coatings (300 degress centigrade)
Why Choose Jianbang? Why choose us? 1.Do specialized in R&D, production and sales of industrial heavy-duty coating. 2.With 17 years experience of personalized and specialized high Performance
anti-corrosive paint, and provides personalized anti-corrosion and application scheme for various corrosive medium and different corrosive conditions. 3.Small batch customization is available. 4.Qualified supplier of China National Nuclear Power, China National Petroleum Corporation, Sinopec Group, and Chinese Navy General equipment department 5.With strict quality control, the standard we manufacturing cold galvanized coating has become the industry standard in China. 6.Hi-tech enterprise and CCTV promoted brand. 7.Scientific research enterprise in cooperation with military industry and Industrial base of high-tech enterprises of national state of art coating 8.Domestic and international cooperation with Changzhou new Material
research institute of Beijing University of Chemical Technology and University of New South Wales in Australia. Engineering technology center of Marine anti-corrosive coating was established at the University of New South Wales. 9.We do have strictly quality control, and make sure the high quality from raw materials to production and shipment. 10.Best delivery time can be 15 days. Company Information Our Factory and workshop
R&D and Technology Center
Domestic and International Exhibitions
Packaging & Shipping
FAQ Q:Are you a trading company or a factory? Jiangsu bangjie anti-corrosion & insulator CO.,LTD is manufacturer. Changzhou IMS new material technology CO.,LTD is our owner trading company. Q: Can you provide the samples?
Yes, the sample is free. And the transportation cost or freight need you to bear. Q: Can you produce the product according to customers' requirements?
Yes, OEM is welcome. We are a professional manufacturer of paint and coatings, include high temperature coatings. Q: What’s your capacity? 100,000 tons per year. Q: What's your delivery date? It depends the purchase quantity. Normally, 5-7days, for 1 x20’ GP after receiving the deposit and all the details confirmed. Q: What is the minimum order quantity? Our minimum order quantity is 1000 KGS Q: Can we mix the cargo loading in one 20ft container? Of course, if the total quantity meets our minimum order quantity. Q: What's the term of payment? We prefer T/T 30% deposit, the balance 70% T/T paid before shipping. Q: What countries give you the most business? Our main target market is Indonesia, Mid-East and Southeast Asia. We also exported to Africa, as well as other countries throughout the world. Q: Can we use our shipping agent? Yes. We had cooperated with many forwarders. If you need, we can recommend some forwarders to you and you can compare the prices and service. Q: Where is your factory located? Can I visit there? It is located in Changzhou City Jiangsu PR, which is closed to Shanghai City. Warmly welcome to visit us.
Contact us if you need more details on Heat Resistant Anti-corrosion Coating. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Heat Resistant Coating Paint、Heat resistant coatings
. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Performance > Heat resistant coatings